Holding HDTC40 - Kingview Engineering
This Holding HDTC40 belong to Kingview Engineering from Singapore (SG). It is a 40-tonne crawler crane with crawler undercarriage from year of manufacture 2015.
The undercarriage is approx. 5.2 meters long and 4.5 meters wide. For the transport over the road is the width to be reduced to 3.2 meters, to adjust the width of the crawlers are those to be unloaded with use of the hydraulic cylinders attached to the undercarriage.
The crane is powered by a Cummins QSB6.7-C215 diesel engine with a power of 158 kW.
The crane is fitted with two hoist winches with each a line pull of approx. 5.7 tonnes.
The counterweight has a total mass of 9 tonnes with a tailswing of 3.9 meters.
The 4-part main boom has a 10.25 meter base length and extends three times to maximum 32 meters.
The jib is stowed next to the main boom and has a base length of 7.3 meters and is exteded 11.4 meters long. The maximum hook height is approx. 44 meters.
A sharp and interesting crane of Kingview Engineering!