Liebherr LTM 1090-4.1 - P&K

P&K from Rijssen (NL) is deploying this sharp Liebherr LTM 1090-4.1 with year of manufacture 2006. It is a 90-tonne crane mounted on a 4-axle carrier.

In transit is the crane 12.9 meters long, 2.75 meters wide and 3.955 meters tall. The transport mass including 6.7 tonnes of counterweight is 48 tonnes.

The undercarriage is powered by a Liebherr 6-cylinder diesel engine with a power of 350 kW (476 hp). This crane has the optional 8x8x8-drive line, where all axles are powered and steerable.

The outrigger base measures 8.59 x 7 meters, or half 8.59 x 5 meters.

On the undercarriage is during the transport over the road 4.2 tonnes of counterweight stored.

Usually is the crane on the move with a 2-axle trailer once full counterweight is required. A set of larger outrigger pads are stored at the back of the crane's chassis.

2.5 tonnes of counterweight remains attached to the superstructure at all times. The crane itself brings 6.7 tonnes of counterweight with it. The full counterweight of the crane is 21 tonnes and has a 3.8 meter tailswing. The crane has a 5.7-tonne hoist winch.

The remaining 14.3 tonnes of counterweight are transported on the 2-axle trailer.

The crane has a 6-part main boom with an 11.1 meter base length and has a maximum length of 50 meters. Optionally is it possible to extend the main boom by a 10.5 - 19 meter long bi-fold swingaway jib, which is mounteable under a 0, 20 or 40 degree angle.

A very sharp and tough crane in the P&K colours!

Back to the Liebherr menu