MAN TGS 26.480 - Wolf System

This sharp MAN TGS 26.480 of Wolf System from Osterhofen (DE) stood togesther with a Liebherr LTM 1070-4.2 on a construction site near Schwäbisch Gmünd (DE).

It is a 3-axle truck with a 6x4-6H drive line, where the two rear axles are driven by the MAN D2676, a 12.4-liter 6-cylinder diesel engine with a power of 350 kW (480 hp) and the front axle is drive hydrostatic by driving speeds below 22 km/h.

Behind the cabin ia a Palfinger PK36002 lorry crane installed. The crane can lift maximum 9.6 tonnes to a 3 meter radius or 1.2 tonnes to an 18.3 meter radius. The crane is fitted with a hoist winch and the outrigger base is maximum 6 meters wide. Behind the front axle are the muffler, battery, two compressed-air tanks and a tank for the hydraulic oil.

At the rear of the chassis are another two outriggers and a large storage compartment made.

On this side are behind the front axle a storage compartment and the diesel tank installed.

A very sharp and special truck by Wolf System!

Back to the MAN menu