Liebherr LTM 1130-5.1
Hup Huat
This fine Liebherr LTM 1130-5.1 belongs to Hup Huat from Singapore (SG). It is a 130-tonne crane mounted on a 5-axle carrier. The crane was built in 2015.
The five-axle carrier is powered by a Liebherr 6-cylinder diesel engine with an output of 370 kW (503 hp). This crane has the optional 10x8x10 drive, whereby axles 1, 2, 4 and 5 are driven and all axles are steerable.
In transport condition, the crane is 15.48 metres long, 2.75 metres wide and 4 metres high. The total weight of the crane is approximately 72 tonnes.
The main boom has a base length of 12.7 metres and telescopes five times to a maximum length of 60 metres.
During transport on public roads, a total of 16 tonnes of ballast is carried on the deck of the carrier.
The outrigger pads are carried in a small frame at the rear of the carrier chassis.
A standard 3.7 tonnes of ballast remains mounted on the superstructure. The crane therefore carries 19.7 tonnes of ballast itself. A further 19.4 tonnes of ballast must be delivered by truck to complete the total ballast of 39.7 tonnes. The ballast has a radius of 4.2 metres. This crane is equipped with the optional second winch, in which case the swing radius of the superstructure is 4.88 metres.
A 10.8- to 19-metre-long folding jib is carried alongside the main boom. This folding jib can be hydraulically adjusted to an angle between 0 and 40 degrees.
A very fine crane from Hup Huat! This is the largest crane operated by this company.